Technical parameters of 150KW gas generator set

45°透视According to the equipment requirements from customers, our company can provide a 150KW gas generator set. The unit uses Steyr T12 engine as the power source to drive the synchronous alternator – famous French brand Leroy Somer -for power generation, and then control and detect the overall operation of the unit through the Danish control system. The 150KW gas generator set is composed of control cabinet, unit cabin and heat dissipation cabin. It is controlled by zones and is safe and reliable. The cable is located on the side of the control cabinet, which is convenient for outgoing. The muffler is located on the top of the box, far away from the side of the control cabinet, so as to ensure operation safety.

 

technical parameters of 150KW gas generator set

S/Nr

Parameter name

Specifications

1

Unit

150KW gas generator set

1.1

Unit model

RTF150C-41N

1.2

Rated power

150kW

1.3

Rated current

270.6A

1.4

Rated voltage

230/400V

1.5

Rated frequency

50Hz

1.6

Start mode

DC 24V electric start

1.7

Speed regulation mode

Electronic speed regulation

1.8

Fuel control mode

Lean combustion, closed-loop control

1.9

Ignition mode

Electrically controlled single cylinder independent high energy ignition

1.10

Unit operation type

One key automatic start / stop

1.11

Oil consumption rate

≤0.3 g/kW*h

1.12

Generating capacity

3.0 kWh/Nm3 (theoretical value)

1.13

Overall dimension of unit

4000×1600×3400mm

1.14

Net weight of unit

4200kg

2

Engine

2.1

Brand

China National Heavy Duty Truck

2.2

Model

T12

2.3

Single unit displacement

11.596

2.4

Intake type

Turbocharging, forced intercooling, 4-Valve structure

2.5

Rated speed

1500r/min

2.6

Cooling mode

Forced water cooling

2.7

Lubrication mode

Pressure, splash lubrication

2.8

OILT Engine-oil-Temperature

≤105 ℃

3

Generator

3.1

Generator

Leroy Somer

3.2

Model

LSA 44.3 VL13

3.3

Power factor

0.8(lag)

3.4

Generation efficiency

92.7%

3.5

Generator capacity

180kVA

3.6

Phase number

Three phase four wire

3.7

Insulation class

H

3.8

Degree of protection

IP23

4

Unit control system

4.1

Brand

DEIF

4.2

Model

AGC series

4.3

Controller function

One key start stop function, data display, recording, protection monitoring and other functions;

4.4

Display function

Speed / oil pressure / water temperature / operation time / current / voltage / frequency / battery voltage / active power, reactive power, load distribution ratio, etc;

4.5

Protection function

Automatic control and alarm functions such as high water temperature, low oil pressure, over speed, over-current, AC and DC voltage, short circuit, etc;

5

Box

High quality skid mounted box, integrated with gas pipeline, exhaust pipeline and other system components;

1.       The technical parameters in this scheme are based on the natural gas with a theoretical low calorific value of 35.8MJ/Nm3 provided by the customer and meet the standard conditions of ISO8528 / 1, iso3046 / 1 and bs5514 / 1.

 

2.      The technical data are measured under standard conditions: absolute atmospheric pressure 100KPA, ambient temperature 25 °C and relative air humidity 30%.

 

3.      Adapt to DIN standard ISO 3046 / 1 rating under environmental conditions.The tolerance of rated fuel consumption is ± 5%.

 

4.        Unit test power factor 0.8 and above.

 

Special natural gas engine: T12 series engine is adopted, which belongs to high-speed / high-efficiency engine. The electronically controlled lean combustion technology can well meet the requirements of engine economy, power and emission. The cooling mode adopts electronic fan closed circulating water cooling. The unit cooling system is independent of the engine room air inlet system. The temperature in the engine room is controlled by intercooling joint control, and the air inlet in the engine room is effectively filtered by the built-in dust filter.

Gas engine control system: The fuel gas closed-loop lean combustion control system imported from ECI of the United States is adopted, including single cylinder independent ignition system, electronic speed regulation system, fuel closed-loop control system, environment adaptive system and automatic diagnosis and protection system to ensure accurate and reliable control of the engine under all operating conditions. The annual output of gas engine control system is 100000 units, and the reliability, stability and safety of the system are more guaranteed.

International high-end brand customized generator: LSA 44.3 series brushless AC synchronous generator —from France Leroy Somer– with high stability moving parts is adopted, and the load impact resistance and anti-interference performance of the generator are improved to ensure the reliability of long-term operation of the equipment.

Multifunctional container: High strength multi-functional unit box, zoning intelligent control, greatly improving reliability and protection performance, using advanced polyurethane coating, bright and wear-resistant;


Post time: Nov-18-2021